Painting and Preparation Process

1. Power-Wash Surfaces

   • Clean all paintable areas, including the roof, stairs, and landings, to remove dirt, grime, and debris.

2. Remove and Reapply Caulking

   • Cut out damaged caulking and apply fresh caulk to seal gaps and prevent moisture intrusion.

3. Fill and Sand Imperfections

   • Patch holes or surface flaws and sand them smooth to ensure an even paint finish.

4. Prime Rusting Nail Heads

   • Apply oil-based primer to rusting nails to protect against further corrosion.

5. Spray Two Top Coats on Siding

   • Use a sprayer to apply two uniform coats of paint to the siding for complete coverage.

6. Roll and Brush Two Top Coats on Trim and Doors

   • Use rollers and brushes to carefully apply two coats of paint to trim and doors for a clean, detailed finish.

SERVICES

Painting and Preparation Process

1. Power-Wash Surfaces

   • Remove dirt and debris from all paintable areas for a clean surface.

2. Scrape and Caulk

   • Remove loose paint from siding and trim; caulk around windows and doors.

3. Spot-Prime

   • Prime scraped areas to promote adhesion and prevent future peeling.

4. Spray Top Coats on Siding

   • Cover windows with plastic and spray two coats of paint on the siding.

5. Roll and Brush on Trim, Deck, Porch, and Doors

   • Apply two coats of paint by hand to ensure precise coverage on the deck, porch, trim, and doors.